Blackout Clutch Cover | For Select Husqvarna Saws

NOW IN BLACK!

Our clutch cover provides superior strength, durability, and functionality, now finished with a black anodized coating.

• Made of 6061-T6 Aircraft Aluminum
• Black anodized coating for a clean, premium appearance
• Harder, more durable surface helps protect the aluminum from scratches and everyday wear
• Larger for better chip management
• Extra-large and longer-lasting polyurethane chip deflector 
• Wider for ease of walking the chain back on without removing the cover 
• Field-tested to ensure quality
• Bigger in size than the stock cover makes it slightly heavier 
• Includes bar nuts, chain sliders, and one chip deflector
• Made in the USA

Kit Components Include:

This comprehensive upgrade kit is designed for seamless integration and enhanced performance:

• Captive Nut Clutch Cover: The core of your upgrade
• 3-Point Westcoast Saw Felling Dogs: Fits exclusively with our 3-point Husqvarna® captive nut felling dogs
• Hardware for Felling Dogs: All necessary hardware for a secure installation.
• Chain Roller: Essential for preventing felling-dog breakage and for chain safety.
• Oversized polyurethane chip deflector

Important Fitment & Installation Details:

Exclusive Compatibility: All Westcoast Saw Husqvarna Clutch Covers fit our 3-point felling dogs only. They are not compatible with factory dogs.

• Non-Retrofit: These Clutch Covers cannot be retrofitted from captive to standard bar nuts.
• 404 Chain Users: If you plan to run a 404 chain, you may need to shave 0.015 (inch) off the chain slider to allow for the additional width.

Torque Recommendations:

• Bar Nuts: The recommended torque range for the bar nuts is 20-25 ft-lbs. This is crucial to ensure the bar is clamped properly. Insufficient tightening can cause the bar to move backward, putting pressure on the chain tensioner rod and potentially leading to system failure or damage to your cover.
• Black Gear Cover Bolts: We recommend 7.4 foot-pounds of torque to tighten the two bolts. Loctite is optional.

Installation Tips

• On the Husqvarna model, you will need to remove the chain adjuster rod from your factory clutch cover and install it in the Westcoast Saw® cover. If you don't have that piece, contact us for help. See video for detailed installation instructions.
• Felling Dog Bolts & Chain Sliders:

1. Felling dog bolts need to be installed from the inside of the cover, facing out so that the nut is on the outside of the felling dog.
2. Next, put the cover flat on a table and make sure that you pound the chain sliders down until it stops against the cover – as far as it will go.
3. The clearance is tight to get maximum wear out of our chain sliders. Once they are down tight, your chain will spin freely.

Explore our full range of Clutch Covers for various chainsaw brands, including our robust Stihl Clutch Cover. Find all the essential Chainsaw Parts you need to keep your saw running at peak performance.

Frequently Asked Questions

What material is the cover made from?

The Westcoast Saw clutch cover is proudly made from high-strength 6061-T6 Aircraft Aluminum, and finished by anodizing. This material is chosen for its exceptional durability, resistance to impact, and ability to withstand the demanding conditions of professional cutting.

Can I install this myself?

Yes, you can install this clutch cover yourself. We provide detailed installation instructions and recommend watching our video guide for visual assistance. While installation is straightforward for those familiar with chainsaw maintenance, it's crucial to follow all instructions carefully, especially regarding torque specifications and chain slider seating, to ensure proper function and safety. If you encounter any difficulties, our support team is available to help.